10 product series5 distinct brandsAUD catalogue pricingProduct-level options

Disposable Vape Screens and Power Modes Explained

10 devices compared by control system, screen and mode-specific endurance

Fixed for simplicity. Screens for status. Selectable modes when you actually want control.

Choose BAR PRO or Ingot for uncomplicated draw activation. Choose SP2S TANK for fixed 13.45W plus a battery display. Choose IGET ONE or TOMORO MAX only if you will use their lower and higher settings. Choose Ice Adjust when cooling and output must be controlled separately.

10 devicescontrol systems compared3 modelswith two output settings1 modelwith separate cooling control2 modelspublish mode-specific counts

Pick the control system that suits you

Draw-and-go simplicity

Choose IGET BAR PRO or ALIBARBAR Ingot when you want fixed operation without a mode decision.

Fixed output with useful status

SP2S TANK pairs fixed 13.45W output with a digital battery display. It is the clearest choice when you want status information but not selectable power.

Screen plus selectable output

Compare IGET ONE and TOMORO MAX. Both publish lower puff estimates at their higher-output settings, so choose the mode before comparing value.

Cooling separate from output

ALIBARBAR Ice Adjust is the specialist option when chill level and device output need independent controls.

Every device power, control and screen system

Mobile: swipe left to compare every column →

ModelControl systemScreen / indicatorPublished estimateCoil / heating
Ingot 9000Fixed, draw activatedSide LED status indicatorUp to 9,000Approx. 1.2Ω mesh
Ice Adjust 12000Four cooling levels + separate output dialLCD status displayUp to 12,000Not consistently published
LTD 9000Fixed formatBattery + e-liquid statusUp to 9,000Mesh heating listed
Swirl 13000Smooth / XtremeVisible spiral reservoirUp to 13,000, mode dependent0.5Ω dual mesh listed
TEQ 12000Draw activated; no selectable mode listedBattery + e-liquid statusUp to 12,000Mesh core listed
BAR PRO 10000Fixed, draw activatedNone listedUp to 10,0001.2Ω mesh
ONE 12000Regular / TurboCurved colour screen: battery, liquid, modeUp to 12,000 Regular / 9,000 Turbo0.6Ω dual mesh
TANK 12000Fixed 13.45WDigital battery displayUp to 12,0000.9Ω mesh cotton
Mate 9000No selectable mode listedLED battery + liquid statusUp to 9,000Mesh heating listed
MAX 1500010W / 16W24 × 24mm colour LEDUp to 15,000 at 10W / 10,000 at 16WDuo-Ignite dual-coil platform

Lower and higher output: the measurable trade-off

Mobile: swipe left to compare every column →

ModelLower-output settingHigher-output settingPublished effect
IGET ONERegularTurbo12,000 estimate falls to 9,000
TOMORO MAX10W16W15,000 estimate falls to 10,000
ALIBARBAR SwirlSmoothXtremeOverall maximum is 13,000; no separate numeric figures listed

IGET ONE and TOMORO MAX publish the effect directly. ONE falls from a 12,000 estimate in Regular to 9,000 in Turbo. TOMORO falls from 15,000 at 10W to 10,000 at 16W. Higher output can be the feature you want, but it changes both the endurance claim and the price-per-advertised-1,000 calculation.

ALIBARBAR Swirl uses Smooth and Xtreme, but no separate numeric estimate is published for each setting in the current catalogue. Its overall 13,000 maximum should not be assigned to both modes.

Fixed output is a design choice, not a missing comparison

BAR PRO and Ingot suit buyers who do not want to confirm a setting. LTD, TEQ and SWIX Mate keep the control system simple while adding battery or liquid status. SP2S TANK publishes a fixed 13.45W output and a digital battery display, giving a known operating point without a mode menu.

The trade-off is straightforward: a fixed format removes adjustment. That is an advantage when simplicity matters and a limitation when the buyer wants to choose between lower output and a stronger setting.

What a screen should do for the decision

Battery status

Useful when you want remaining-power information rather than waiting for a simple warning indicator.

Liquid status

IGET ONE, ALIBARBAR LTD, ALIBARBAR TEQ and SWIX Mate explicitly list battery-and-liquid visibility.

Active-mode confirmation

Most important on ONE and TOMORO because the selected setting changes the published puff estimate.

When no screen is preferable

BAR PRO and Ingot reduce controls and visual information. A display is not automatically better if you do not need status data.

Cooling level is not wattage

ALIBARBAR Ice Adjust lists four cooling levels and a separate bottom output dial. Cooling changes the chill component of the named profile; the output control changes device power. Treating those as the same setting leads to the wrong comparison with Regular/Turbo or 10W/16W devices.

How power mode changes catalogue value

At the checked prices, IGET ONE is A$5.17 per advertised 1,000 in Regular and A$6.89 in Turbo. TOMORO MAX is A$2.93 at 10W and A$4.40 at 16W. Those changes come from the manufacturer’s different mode-specific estimates, not from a price change.

Price-per-1,000 is useful for normalising claims, but it does not measure draw feel, flavour preference, screen usefulness or real duration.

Common power and screen mistakes

  • Assuming every named mode has a published wattage.
  • Using the largest puff estimate for a higher-output setting.
  • Confusing an Ice flavour name with adjustable cooling hardware.
  • Paying for a screen without identifying which status information is useful.
  • Calling fixed output inferior when the buyer wants fewer controls.

Disposable vape power mode FAQ

Does higher output reduce the puff estimate?

It does on the two models that publish both figures: IGET ONE and TOMORO MAX.

Which model publishes a fixed wattage?

SP2S TANK at 13.45W.

Which model has adjustable cooling?

ALIBARBAR Ice Adjust, with four cooling levels and a separate output dial.

Which screens show liquid status?

IGET ONE, ALIBARBAR LTD, ALIBARBAR TEQ and SWIX Mate explicitly list liquid information. TOMORO describes a colour device-status display.

Do I need a screen?

No. Choose one when battery, liquid or active-mode confirmation changes your decision. Otherwise, a fixed draw-activated format may be the cleaner fit.

Source method: manufacturer specifications are used for IGET ONE, BAR PRO, SP2S TANK and TOMORO MAX. Other features are explicitly treated as store-listed and should be confirmed against the supplied pack. Prices and availability are the 14 November 2026 catalogue snapshot.